All that Glitters is Gold...Candles!

We are getting into the Thanksgiving decorating spirit (and not jumping right to Christmas...hate that!).  Our first project was really simple and easy: make plain candles prettier!  We used plain stick candles, metallic spray paint, spray adhesive, extra fine glitter, clear gloss acrylic spray paint and a wire hanger.

Since we wanted the candles to be evenly coated, we first straighten the hook of the wire hanger and then jammed it into the bottom of the candle.  Make sure you apply a good amount of pressure but don't try to get crazy because you don't want to bust up the base of your candle.  Now you can hang or hold your candle so that you won't have to set it down and only work on one side at a time.

 

The rest is pretty simple.  First spray the entire candle with the metallic spray paint by following the directions on the spray paint can.  You may even want to give it two coats.  After it is dry, spray the candle with the spray adhesive, once again following the directions on the can.  Sprinkle the extra fine glitter over the adhesive and allow that to set until completely dry.  Finally, spray the entire candle with the clear acrylic.  You may want to apply a few coats of the spray acrylic so that the glitter is really covered well and won't fall off every time you move it.  

We made these candles to use as a decoration and we have no intention of burning them.  Typically, you shouldn't burn things that have been covered in paint, glue, and glitter, so we don't recommend doing this project on candles you are going to burn unless you are working with products that are meant to be set on fire.